OFFICIAL EMLID RESELLER
Emlid range · Base and rover GNSS RTK receiver
Emlid Reach RS4
Emlid's versatile multi-band GNSS RTK receiver. It works as a base or a rover and offers 672 channels, next-generation tilt compensation, UHF and LoRa radios and an LTE modem, in an IP68 magnesium housing.
From €3,299 excl. VAT · commissioning and training by DART Solutions

672
channels, L1/L2/L5/L6 bands
7 mm
+ 1 ppm, horizontal RTK accuracy
Base or rover
2 W UHF and 1 W LoRa radio
16 h
battery life as an RTK rover
IP68
from −40 to +65 °C
Offers and prices
As a rover with a correction network, as a base for your drones or as a base and rover pair.
RECEIVER ONLY
Reach RS4
€3,299 excl. VAT
• 2 W UHF and 1 W LoRa radio
• Carrying case, USB-C cable
• LoRa 860-930 MHz and UHF 410-470 MHz antennas
FOR RTK DRONES
Drone base station kit
€3,940 excl. VAT
• Reach RS4, bumper and adapter
• Aluminium tripod, tribrach with optical plummet
• Telescopic pole
WORKS WITHOUT A NETWORK
Base and rover kit
€7,550 excl. VAT
• RS4 as base, RS4 Pro as rover
• Corrections over UHF or LoRa radio
• Adapters and bumpers for both
Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.
One receiver for every site
All bands, all constellations
Tracks L1, L2, L5 and L6 signals on 672 channels: more than 40 satellites at once and a fix in about 5 seconds.
Next-generation tilt
Factory calibrated, ready after a few movements and with no angle limit: 18 mm at 30° tilt.
Base and rover
NTRIP corrections (VRS or single base, RTCM3), 450 MHz UHF or 915 MHz LoRa radio: the RS4 adapts to every set-up.
Quick release mount
A firm, play-free connection to the pole, for consistent accuracy every time it is mounted.
All day long
16 h as an RTK rover. Charges via USB-C Power Delivery, from the mains, in a vehicle or from a power bank.
Rugged
Magnesium alloy housing, IP68, operation from −40 to +65 °C.

MULTI-BAND ACCURACY
Centimetre accuracy even under trees
Thanks to L5 and L6 signals and its 672 channels, the RS4 keeps a fixed solution where dual-band receivers lose it: under canopy, close to buildings or at the bottom of a trench.
• Boundary and surveys in wooded areas
• As-built surveys of urban utilities
• Earthworks and road alignment
BASE STATION
An RTK base for your drones
The RS4 serves as a base for any RTK drone that accepts NTRIP corrections in RTCM3, including DJI, Wingtra, Autel and Skydio drones. Emlid's free NTRIP caster relays the corrections between the base and the drone.
• Local base, no subscription
• Free Emlid NTRIP caster
• Drone base station kit available


SOFTWARE INCLUDED
Emlid Flow in your pocket
Survey, stakeout and checks are controlled from the Emlid Flow app, synced with Emlid Flow 360 to share projects with the office.
• iOS and Android app
• Instant cloud sync
• Export to your CAD and GIS software
Reach RS4 specifications
Dimensions and weight
128.6 × 128.6 × 99.3 mm · 927 g
Ruggedness
Magnesium alloy · IP68 · −40 to +65 °C
GNSS
GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC · L1/L2/L5/L6 · 672 channels
RTK accuracy
H: 7 mm + 1 ppm · V: 14 mm + 1 ppm
PPK accuracy
H: 5 mm + 0.5 ppm · V: 10 mm + 1 ppm
Static accuracy
H: 4 mm + 0.5 ppm · V: 8 mm + 1 ppm
Tilt
RTK + 2 mm + 0.3 mm/° · no angle limit
Fix and update rate
Convergence ≈ 5 s · up to 10 Hz
LoRa radio
868/915 MHz · up to 1 W · range up to 8 km
UHF radio
410-470 MHz · up to 2 W · TRIMTALK 450S
LTE modem
4G/3G/2G · nano-SIM card
Connectivity
Wi-Fi 802.11a/b/g/n · Bluetooth 5.1 · RS-232 · USB-C
Battery life
Li-ion 5,000 mAh, 36 Wh · 16 h as RTK rover
Charging
USB-C Power Delivery up to 15 V / 3 A
Data
NTRIP, RTCM3 · NMEA, LLH/XYZ · RINEX, UBX
Storage
16 GB internal memory
Indicative values. Specifications provided by Emlid. Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

DART Solutions, your official Emlid reseller since November 2026
Buying from DART means support from choosing the equipment right through to the field, from a team based in France.
Advice and selection
We start from your sites and deliverables to choose the right receiver, the right correction source and the right accessories.
Commissioning
Base and rover set-up, NTRIP or radio corrections, coordinate system and ready-to-use Emlid Flow projects.
Training
Hands-on training in the field: surveying, stakeout, accuracy checks and data exchange with the office.
Support and after-sales
A single point of contact for your questions, your updates and liaison with Emlid for warranty claims.
Reach RS4 FAQ
How does it differ from the RS4 Pro?
Same accuracy, same radios, same LTE modem and same battery life. The RS4 Pro adds two cameras for augmented-reality stakeout and image-based measuring.
Can it be used as a base?
Yes. The RS4 broadcasts its corrections over UHF radio (up to 2 W), LoRa (up to 1 W, about 8 km) or over the internet through Emlid's NTRIP caster.
Is it compatible with my RTK drone?
With any RTK drone that accepts NTRIP corrections in RTCM3, including DJI, Wingtra, Autel and Skydio drones according to Emlid. We check your set-up before you order.
Can I work with a base from another brand?
The RS4 accepts standard RTCM3 corrections over NTRIP, and its UHF radio uses the TRIMTALK 450S protocol. We validate compatibility with your existing equipment.
Can DART configure my receivers?
Yes: base and rover set-up, corrections, coordinate system and field training are all part of our support.
A project with the Reach RS4?
Rover, drone base or base and rover pair: we help you choose the right set-up.
Request a quote