Opens in a new tab

OFFICIAL EMLID RESELLER

Emlid range · Multi-band GNSS RTK receiver

Emlid Reach RS3

Emlid's proven multi-band GNSS RTK receiver. IMU tilt compensation, LoRa radio, LTE modem and 18 hours of battery life make it the most cost-effective solution for a base and rover pair.

From €2,499 excl. VAT · commissioning and training by DART Solutions

Récepteur GNSS RTK Emlid Reach RS3

184

channels, L1/L2 bands

7 mm

+ 1 ppm, horizontal RTK accuracy

60°

of compensated tilt

18 h

battery life as an RTK rover

IP67

from −20 to +65 °C

Offers and prices

As a rover, as a base and rover pair, or as a base for a Reach M2 module.

RECEIVER ONLY

Reach RS3

€2,499 excl. VAT

• IMU tilt compensation

• Carrying case with strap

• LoRa antenna and USB-C cable

BASE AND ROVER

Reach RS3 survey kit

€4,998 excl. VAT

• 2 × Reach RS3

• 2 cases, 2 LoRa antennas, 2 cables

• Corrections over LoRa radio, no network needed

DRONE

Reach M2 unmanned systems kit

€3,500 excl. VAT

• Reach RS3 as base

• Reach M2 module with GNSS antenna

• Cables and camera hot shoe adapter

Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

RTK essentials at a controlled cost

IMU tilt

Up to 60° of tilt, factory calibrated and immune to magnetic fields; initialises in about ten seconds.

Fast fix

Centimetre solution in about 5 seconds, with good performance even with a partially obstructed sky view.

RINEX and PPP

Raw data logging for post-processing in Emlid Studio, or through the OPUS, AUSPOS and PPP services.

LTE modem

Nano-SIM card to receive or broadcast NTRIP corrections without a smartphone.

LoRa radio

Base and rover link up to 8 km at 868/915 MHz, plus UHF 410-470 MHz reception from TRIMTALK 450S bases.

18 h battery life

37 Wh battery, USB-C charging, can be powered by a power bank.

Emlid Reach RS3 avec son étui de transport et son antenne LoRa

BASE AND ROVER

A base and rover pair with no subscription

Two RS3 units linked by their LoRa radio form a standalone RTK system. You work to the centimetre where there is no mobile coverage.

• LoRa link up to 8 km

• No subscription required

• Survey kit with 2 receivers

SOFTWARE

Control everything from Emlid Flow

Emlid Flow and Emlid Flow 360 (basic features free), Emlid Studio for post-processing and Emlid Caster to broadcast your own corrections.

• Surveying and stakeout

• Free post-processing with Emlid Studio

• Emlid Caster: up to 5 bases and 10 rovers

Relevé terrain avec l'application Emlid Flow sur smartphone

Reach RS3 specifications

Dimensions and weight

126 × 126 × 142 mm · 950 g

Ruggedness

Polycarbonate and elastomer · IP67 · −20 to +65 °C

GNSS

GPS/QZSS L1C/A, L2C · GLONASS L1OF, L2OF · BeiDou B1I, B2I · Galileo E1B/C, E5b

Channels and update rate

184 channels · up to 10 Hz · 6-axis IMU

RTK accuracy

H: 7 mm + 1 ppm · V: 14 mm + 1 ppm

PPK accuracy

H: 5 mm + 0.5 ppm · V: 10 mm + 1 ppm

Static accuracy

H: 4 mm + 0.5 ppm · V: 8 mm + 1 ppm

Tilt

RTK + 2 mm + 0.3 mm/° · up to 60°

LoRa radio

868/915 MHz · 0.1 W · up to 8 km

UHF reception

410-470 MHz, TRIMTALK 450S · optional antenna

LTE modem

4G/3G/2G · nano-SIM card

Connectivity

Wi-Fi 802.11 b/g/n · Bluetooth 5.4 · RS-232 · USB-C

Battery life

Li-ion 5,200 mAh, 37.4 Wh · 18 h as RTK rover, 22 h logging

Charging

USB-C 5 V / 3 A

Data

NTRIP, RTCM3 · NMEA, LLH/XYZ · RINEX, UBX

Storage

16 GB internal memory

Indicative values. Specifications provided by Emlid. Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

Emlid logo, official distributor

DART Solutions, your official Emlid reseller since November 2026

Buying from DART means support from choosing the equipment right through to the field, from a team based in France.

Advice and selection

We start from your sites and deliverables to choose the right receiver, the right correction source and the right accessories.

Commissioning

Base and rover set-up, NTRIP or radio corrections, coordinate system and ready-to-use Emlid Flow projects.

Training

Hands-on training in the field: surveying, stakeout, accuracy checks and data exchange with the office.

Support and after-sales

A single point of contact for your questions, your updates and liaison with Emlid for warranty claims.

Reach RS3 FAQ

RS3 or RS4?

The RS4 tracks L5 and L6 bands on 672 channels (better performance under canopy), transmits UHF up to 2 W, withstands −40 °C and is IP68 rated. The RS3 remains a safe choice for surveys in open areas and a base and rover pair on a controlled budget.

Is the RS3 still on sale?

Yes, Emlid still offers it, on its own or as a survey kit with two receivers.

Can it serve as a base for a drone?

Yes. It is the base for the Reach M2 module in the unmanned systems kit, over LoRa radio or NTRIP.

Can it receive corrections from an existing UHF base?

Yes, the RS3 receives 410-470 MHz UHF corrections from TRIMTALK 450S bases with the optional UHF antenna. It does not transmit on UHF.

Can DART commission a base and rover pair?

Yes: radio link set-up, coordinate systems and training for your crews.

A project with the Reach RS3?

Base and rover pair or drone base: we recommend the most cost-effective set-up.

Request a quote