OFFICIAL EMLID RESELLER
Emlid range · Multi-band GNSS RTK receiver
Emlid Reach RS3
Emlid's proven multi-band GNSS RTK receiver. IMU tilt compensation, LoRa radio, LTE modem and 18 hours of battery life make it the most cost-effective solution for a base and rover pair.
From €2,499 excl. VAT · commissioning and training by DART Solutions

184
channels, L1/L2 bands
7 mm
+ 1 ppm, horizontal RTK accuracy
60°
of compensated tilt
18 h
battery life as an RTK rover
IP67
from −20 to +65 °C
Offers and prices
As a rover, as a base and rover pair, or as a base for a Reach M2 module.
RECEIVER ONLY
Reach RS3
€2,499 excl. VAT
• IMU tilt compensation
• Carrying case with strap
• LoRa antenna and USB-C cable
BASE AND ROVER
Reach RS3 survey kit
€4,998 excl. VAT
• 2 × Reach RS3
• 2 cases, 2 LoRa antennas, 2 cables
• Corrections over LoRa radio, no network needed
DRONE
Reach M2 unmanned systems kit
€3,500 excl. VAT
• Reach RS3 as base
• Reach M2 module with GNSS antenna
• Cables and camera hot shoe adapter
Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.
RTK essentials at a controlled cost
IMU tilt
Up to 60° of tilt, factory calibrated and immune to magnetic fields; initialises in about ten seconds.
Fast fix
Centimetre solution in about 5 seconds, with good performance even with a partially obstructed sky view.
RINEX and PPP
Raw data logging for post-processing in Emlid Studio, or through the OPUS, AUSPOS and PPP services.
LTE modem
Nano-SIM card to receive or broadcast NTRIP corrections without a smartphone.
LoRa radio
Base and rover link up to 8 km at 868/915 MHz, plus UHF 410-470 MHz reception from TRIMTALK 450S bases.
18 h battery life
37 Wh battery, USB-C charging, can be powered by a power bank.

BASE AND ROVER
A base and rover pair with no subscription
Two RS3 units linked by their LoRa radio form a standalone RTK system. You work to the centimetre where there is no mobile coverage.
• LoRa link up to 8 km
• No subscription required
• Survey kit with 2 receivers
SOFTWARE
Control everything from Emlid Flow
Emlid Flow and Emlid Flow 360 (basic features free), Emlid Studio for post-processing and Emlid Caster to broadcast your own corrections.
• Surveying and stakeout
• Free post-processing with Emlid Studio
• Emlid Caster: up to 5 bases and 10 rovers

Reach RS3 specifications
Dimensions and weight
126 × 126 × 142 mm · 950 g
Ruggedness
Polycarbonate and elastomer · IP67 · −20 to +65 °C
GNSS
GPS/QZSS L1C/A, L2C · GLONASS L1OF, L2OF · BeiDou B1I, B2I · Galileo E1B/C, E5b
Channels and update rate
184 channels · up to 10 Hz · 6-axis IMU
RTK accuracy
H: 7 mm + 1 ppm · V: 14 mm + 1 ppm
PPK accuracy
H: 5 mm + 0.5 ppm · V: 10 mm + 1 ppm
Static accuracy
H: 4 mm + 0.5 ppm · V: 8 mm + 1 ppm
Tilt
RTK + 2 mm + 0.3 mm/° · up to 60°
LoRa radio
868/915 MHz · 0.1 W · up to 8 km
UHF reception
410-470 MHz, TRIMTALK 450S · optional antenna
LTE modem
4G/3G/2G · nano-SIM card
Connectivity
Wi-Fi 802.11 b/g/n · Bluetooth 5.4 · RS-232 · USB-C
Battery life
Li-ion 5,200 mAh, 37.4 Wh · 18 h as RTK rover, 22 h logging
Charging
USB-C 5 V / 3 A
Data
NTRIP, RTCM3 · NMEA, LLH/XYZ · RINEX, UBX
Storage
16 GB internal memory
Indicative values. Specifications provided by Emlid. Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

DART Solutions, your official Emlid reseller since November 2026
Buying from DART means support from choosing the equipment right through to the field, from a team based in France.
Advice and selection
We start from your sites and deliverables to choose the right receiver, the right correction source and the right accessories.
Commissioning
Base and rover set-up, NTRIP or radio corrections, coordinate system and ready-to-use Emlid Flow projects.
Training
Hands-on training in the field: surveying, stakeout, accuracy checks and data exchange with the office.
Support and after-sales
A single point of contact for your questions, your updates and liaison with Emlid for warranty claims.
Reach RS3 FAQ
RS3 or RS4?
The RS4 tracks L5 and L6 bands on 672 channels (better performance under canopy), transmits UHF up to 2 W, withstands −40 °C and is IP68 rated. The RS3 remains a safe choice for surveys in open areas and a base and rover pair on a controlled budget.
Is the RS3 still on sale?
Yes, Emlid still offers it, on its own or as a survey kit with two receivers.
Can it serve as a base for a drone?
Yes. It is the base for the Reach M2 module in the unmanned systems kit, over LoRa radio or NTRIP.
Can it receive corrections from an existing UHF base?
Yes, the RS3 receives 410-470 MHz UHF corrections from TRIMTALK 450S bases with the optional UHF antenna. It does not transmit on UHF.
Can DART commission a base and rover pair?
Yes: radio link set-up, coordinate systems and training for your crews.
A project with the Reach RS3?
Base and rover pair or drone base: we recommend the most cost-effective set-up.
Request a quote