OFFICIAL EMLID RESELLER
Emlid range · GNSS RTK module for drones
Emlid Reach M2
Emlid's multi-band GNSS RTK module for drones and autonomous systems. It weighs 35 g and provides centimetre positioning in RTK or PPK. Synchronised with the camera shutter, it greatly reduces the number of ground control points.
From €649 excl. VAT · module only

35 g
56 × 45 × 15 mm
L1/L2
multi-band, 184 channels
7 mm
+ 1 ppm, kinematic accuracy
100 km
PPK baseline
16 GB
of RINEX logging
Offers and prices
The module on its own to integrate your own antenna, or the complete solution with a ground base.
MODULE ONLY
Reach M2
€649 excl. VAT
• Reach M2 module
• Micro-USB cable
• 6-pin and 5-pin JST-GH cables
READY TO MOUNT
Reach M2 with GNSS antenna
€897 excl. VAT
• Reach M2 module and cables
• Multi-band helical GNSS antenna
• 0.5 m SMA adapter cable
BASE + DRONE
Reach M2 unmanned systems kit
€3,500 excl. VAT
• Reach M2 with GNSS antenna
• Reach RS3 as ground base
• Camera hot shoe adapter and extension
Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.
Accurate georeferencing, on board
Camera synchronisation
Connected to the hot shoe, the module timestamps every shot with sub-microsecond resolution.
Fewer control points
With PPK, ground control points are only needed to check the model's accuracy.
Real-time RTK
Centimetre position sent to the autopilot (Pixhawk cables available) for autonomous systems.
RINEX logging
Raw data with photo events up to 10 Hz, on 16 GB of internal memory.
Free processing
Post-process RINEX files with Emlid Studio or RTKLIB, with no licence.
Open
Works with Reach bases as well as any RTCM3 and NTRIP compatible receiver or network.

INTEGRATION
Everything to equip your drone
The M2 is powered at 5 V via USB or JST-GH and communicates over UART, USB or Wi-Fi. An optional LoRa radio receives corrections from a Reach base up to 8 km away.
• Optional multi-band GNSS antenna
• Camera hot shoe adapter
• Cables for Pixhawk autopilots
PPK in four steps
STEP 1
Connect
Connect the Reach M2 to the hot shoe of the drone's camera.
STEP 2
Fly
The module logs the position and time of every shot.
STEP 3
Download
Download the logs from the M2 and the base (Reach RS, CORS network or other).
STEP 4
Process
Emlid Studio computes the accurate geotag file for the photos.
Reach M2 specifications
Dimensions and weight
56.4 × 45.3 × 14.6 mm · 35 g
Temperature
−20 to +65 °C
Power supply
4.75 to 5.5 V via USB or JST-GH · 300 mA typ. at 5 V
Antenna
3.3 V bias · optional GNSS antenna
GNSS
GPS/QZSS L1C/A, L2C · GLONASS L1OF, L2OF · BeiDou B1I, B2I · Galileo E1B/C, E5b
Channels and update rate
184 channels · 10 Hz
Static accuracy
H: 4 mm + 0.5 ppm · V: 8 mm + 1 ppm
Kinematic accuracy
H: 7 mm + 1 ppm · V: 14 mm + 1 ppm
Connectivity
Wi-Fi 802.11 b/g/n · Bluetooth 4.0 · USB, UART, event
LoRa radio
Optional · 868/915 MHz · up to 8 km
Corrections and outputs
NTRIP, VRS, RTCM3 · NMEA, LLH/XYZ
Logging
RINEX with events up to 10 Hz · 16 GB
Indicative values. Specifications provided by Emlid. Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

DART Solutions, your official Emlid reseller since November 2026
Buying from DART means support from choosing the equipment right through to the field, from a team based in France.
Advice and selection
We start from your sites and deliverables to choose the right receiver, the right correction source and the right accessories.
Commissioning
Base and rover set-up, NTRIP or radio corrections, coordinate system and ready-to-use Emlid Flow projects.
Training
Hands-on training in the field: surveying, stakeout, accuracy checks and data exchange with the office.
Support and after-sales
A single point of contact for your questions, your updates and liaison with Emlid for warranty claims.
Reach M2 FAQ
Is the antenna included?
Not with the module only (€649 excl. VAT), which accepts your own antenna. The version with a multi-band GNSS antenna costs €897 excl. VAT.
RTK or PPK: which one?
PPK is the most robust for mapping: no radio link during the flight, and processing is done afterwards in Emlid Studio. RTK is useful when the position must be known in flight, for example for an autopilot.
Which cameras are compatible?
Any camera with a hot shoe, using the Reach M2/M+ hot shoe adapter that wires the synchronisation pulse.
Do I need a ground base?
You need reference data: a Reach RS base, a CORS network or an NTRIP source. The unmanned systems kit includes a Reach RS3 base.
Can it be integrated on a robot?
The M2 provides an RTK position to an autonomous system over UART or USB. DART assesses integration on your robotic platforms case by case.
Does DART support drone integration?
Yes: choice of antenna and mounting, camera synchronisation set-up and getting started with the PPK workflow in Emlid Studio.
Equipping your drone with a Reach M2?
Integration, PPK workflow or ground base: we help you make your georeferencing reliable.
Request a quote