Opens in a new tab

OFFICIAL EMLID RESELLER

Emlid range · Accessories

Emlid accessories

Poles, tripods and tribrachs, smartphone mounts, scanning handles, antennas, cables and chargers: all genuine Emlid accessories for your Reach receivers, with their compatibility.

Public prices excl. VAT · compatibility advice included

Emlid Perche d'arpentage avec support pour smartphone

Poles, tripods and set-up

To work as a rover on a pole or to set up a base over a point.

Emlid Perche d'arpentage avec support pour smartphone

Survey pole with smartphone mount

3 sections, 0.74 to 1.80 m, carrying bag. All Reach models.

€299 excl. VAT

Emlid Perche d'extension

20 cm extension pole

5/8" thread, to offset the radio antenna. RS4, RS4 Pro, RX2.

€49 excl. VAT

Emlid Embout de remplacement pour la perche d'arpentage

Replacement tip for survey pole

Anodised aluminium, steel tip, M14 thread.

€19 excl. VAT

Emlid Adaptateur à dégagement rapide

Quick release adapter

Fast, play-free mounting on the pole. RX2, RS4, RS4 Pro.

€99 excl. VAT

Emlid Bipied Seco

Seco bipod

Keeps the pole plumb over a point.

€169 excl. VAT

Emlid Trépied Seco en aluminium

Seco aluminium tripod

Lightweight, 5/8" thread, to set up a base.

€99 excl. VAT

Emlid Trépied en bois Seco

Seco wooden tripod

Sturdy and stable, 5/8" thread, shoulder strap.

€249 excl. VAT

Emlid Embase Seco avec plomb optique

Seco tribrach with optical plummet

Accurate base centring (0.5 mm at 1.5 m).

€289 excl. VAT

Emlid Adaptateur d'embase rotatif Seco

Seco rotating tribrach adapter

5/8" thread, compatible with all tribrachs.

€79 excl. VAT

Emlid Adaptateur fileté

1/4" to 5/8" thread adapter

To mount a Reach on a photo tripod. All Reach models except RS+.

€19 excl. VAT

Smartphone and 3D scanning

To attach the smartphone to the pole and scan with the Reach RX2.

Emlid Support pour smartphone

Smartphone mount

With bubble level, compatible with all Emlid poles.

€99 excl. VAT

Emlid Boîtier SP connect

SP Connect case

SP Connect compatible phone case, depending on the smartphone model.

€45 excl. VAT

Poignée de balayage Emlid

Emlid scanning handle

For 3D scanning with the Reach RX2: handle, wrist strap, Allen key.

€199 excl. VAT

Poignée de balayage Pix4D et Emlid

Pix4D and Emlid scanning handle

Version dedicated to PIX4Dcatch with the Reach RX2.

€199 excl. VAT

Sac de transport pour la poignée de balayage Emlid

Scanning handle carrying bag

Holds the RX2, the handle and an SP Connect case (up to 6.9").

€129 excl. VAT

Protection

Rubber bumpers to protect your receivers from impacts.

Emlid Pare-chocs Reach RS4 Pro

Reach RS4 Pro bumper

Rubber, specific to the RS4 Pro.

€29 excl. VAT

Emlid Pare-chocs Reach RS4

Reach RS4 bumper

Rubber, not compatible with the RS4 Pro.

€29 excl. VAT

Antennas, radio and drone

Spare antennas, GNSS antennas and equipment for the Reach M2.

Emlid Antenne LoRa Reach RS4 & RS4 Pro 860-930 MHz

RS4 / RS4 Pro LoRa antenna

860-930 MHz, transmits and receives corrections.

€49 excl. VAT

Emlid Antenne UHF Reach RS4 & RS4 Pro 410-470 MHz

RS4 / RS4 Pro UHF antenna

410-470 MHz, transmits and receives corrections.

€49 excl. VAT

Emlid Antenne Reach RS3 UHF 410-470 MHz

Reach RS3 UHF antenna

Receives 410-470 MHz UHF corrections.

€49 excl. VAT

Emlid Antenne LoRa Reach RS3/RS2+

RS3 / RS2+ LoRa antenna

Compatible with RS3, RS2+, RS2, RS+ and the Reach M+ LoRa radio.

€29 excl. VAT

Emlid Antenne GNSS multibande

Multi-band GNSS antenna

L1/L2 helical antenna for Reach M2, 0.5 m SMA cable.

€229 excl. VAT

Emlid Radio LoRa Reach M2/M+

Reach M2 / M+ LoRa radio

Receives corrections from a Reach base up to 8 km away.

€135 excl. VAT

Emlid Adaptateur pour sabot de caméra Reach M2/M+

Reach M2 / M+ hot shoe adapter

Timestamps every photo, essential for PPK.

€55 excl. VAT

Cables and power

To power a receiver continuously, exchange data or charge in the field.

Emlid Câble Reach RS4 & RS4 Pro pour alimentation permanente

RS4 / RS4 Pro permanent power cable

DB9 and 2.5 × 5.5 mm jack connectors.

€79 excl. VAT

Emlid Câble Reach RS4 et RS4 Pro avec connecteur DB9 femelle

RS4 / RS4 Pro DB9 female cable

Data transmission (no power).

€69 excl. VAT

Emlid Câble Reach RS4 & RS4 Pro avec connecteur DB9 mâle

RS4 / RS4 Pro DB9 male cable

Data transmission (no power).

€69 excl. VAT

Emlid Câble Reach RS4 & RS4 Pro sans deuxième connecteur

RS4 / RS4 Pro cable without 2nd connector

To power the receiver.

€59 excl. VAT

Emlid Câble pour Reach RS3 et RS2+ sans deuxième connecteur

RS3 / RS2+ cable without 2nd connector

To power the receiver. RS3, RS2+, RS2, RS+.

€39 excl. VAT

Emlid Câble pour Reach RS3 et RS2+ avec connecteur DB9 femelle

RS3 / RS2+ DB9 female cable

Data transmission (no power).

€49 excl. VAT

Emlid Câble pour Reach RS3 et RS2+ avec connecteur DB9 mâle

RS3 / RS2+ DB9 male cable

Data transmission (no power).

€49 excl. VAT

Emlid Câble adaptateur d'antenne SMA Reach M2/M+ 0,5 m

0.5 m SMA adapter cable

GNSS antenna for Reach M2 / M+.

€19 excl. VAT

Emlid Câble adaptateur d'antenne TNC Reach M2/M+ 2 m

2 m TNC adapter cable

TNC GNSS antenna for Reach M2 / M+.

€19 excl. VAT

Emlid Câble d'extension d'antenne Reach M2/M+ 2 m

2 m antenna extension cable

For Reach M2 / M+, with the original 0.5 m cable.

€19 excl. VAT

Emlid Câble Reach M2/M+ JST-GH vers DF13 6p-6p pour Pixhawk 1

Pixhawk 1 cable

JST-GH to 6-pin DF13, Reach M2 / M+.

€15 excl. VAT

Emlid Câble Reach M2/M+ JST-GH 6p-6p pour Pixhawk 2

Pixhawk 2 cable

6-pin JST-GH, Reach M2 / M+.

€15 excl. VAT

Emlid Chargeur rapide

Fast mains charger

20 W USB-C PD: 80% in 2 h 30, 100% in under 3 h 30.

€19 excl. VAT

Emlid Chargeur rapide double pour voiture

Dual fast car charger

2 × 20 W USB-C PD.

€19 excl. VAT

Emlid Câble USB-C à charge rapide

Fast-charging USB-C cable

Braided nylon, 1.2 m, up to 5 A.

€10 excl. VAT

Compatibility as stated by Emlid. Specifications provided by Emlid. Public prices excluding VAT as published by Emlid (October 2026), shipping not included, subject to change; project and volume pricing on request.

Not sure about compatibility?

Tell us which receiver you use: we confirm the right accessories and send you a quote.

Request a quote